[general]
version = 4
name = Prusa Pretty PLA V3 #2
definition = fdmprinter

[metadata]
setting_version = 4
quality_type = fast
position = 0
type = quality_changes

[values]
acceleration_infill = 1500
acceleration_layer_0 = 1000
acceleration_wall = 800
bottom_layers = =999999 if infill_sparse_density == 100 else math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))
brim_width = 10.0
coasting_enable = False
cool_fan_full_layer = 7
cool_fan_speed_0 = 5
cool_lift_head = False
cool_min_layer_time = 20
cool_min_speed = 10
default_material_print_temperature = 215.0
fill_outline_gaps = False
infill_before_walls = False
infill_pattern = grid
infill_sparse_density = 20
line_width = 0.42
material_diameter = 1.75
material_final_print_temperature = 200.0
material_flow = 100
material_initial_print_temperature = 200.0
material_print_temperature = 210.0
material_print_temperature_layer_0 = 215.0
optimize_wall_printing_order = True
retraction_amount = 0.8
retraction_extra_prime_amount = 0.2
retraction_hop = 0.6
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_speed = 30
roofing_layer_count = 1
skin_outline_count = 0
speed_equalize_flow_enabled = True
speed_infill = 120
speed_layer_0 = 20
speed_print = 45
speed_support = 60
speed_support_interface = 60.0
speed_topbottom = 30
speed_travel = 160
speed_wall_0 = 20
speed_wall_x = 80
support_bottom_density = 60
support_infill_rate = 10
support_interface_enable = True
support_interface_pattern = zigzag
support_line_width = 0.35
support_pattern = lines
support_roof_density = 60
support_z_distance = 0.8
top_layers = 5
travel_avoid_other_parts = False
travel_avoid_supports = True
wall_line_count = 2
z_seam_corner = z_seam_corner_any
z_seam_type = sharpest_corner
z_seam_y = 105

